News

Wear Parts Materials in PropertiesManganese Standard all-around manganese level and the most common for all jaws and cone liners is 18%. Low manganese grade steel (14%) work hardens slower than hig...

The heavy-duty machines use in the first mechanical stage of comminution are mainly jaw crushers. The pivoted jaw swings around the pivot and makes an impact on the fixed jaw, crushing the fed lump...

Maintaining sharp teeth will help increase productivity and reduce the stress on your machine. Protecting your machine and excavator bucket, resulting in longer machine life, and reducing maintenan...

Check the feed size and gradation:• Oversize feed material decreases capacity and can cause abnormal wear of the liners• Too small a feed size for the cavity increases the wear at the bottom part o...